PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SW25607-4
SW25607-4 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,QUICK RELEASE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1039 OR STEEL COMP 1040 SHANK, grip_length: 4.000 INCHES NOMINAL IN, actuation_type: PULL, lanyard_length: 7.250 INCHES MINIMUM AND 7.750 INCHES MAXIMUM IN, shank_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: RING HANDLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-359-4710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SW25607-4
NSN: 5315-01-359-4710
FSC: 5315
CAGE: 98255 — DRS SUSTAINMENT SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1039 OR STEEL COMP 1040 SHANK
grip_length4.000 INCHES NOMINAL IN
actuation_typePULL
lanyard_length7.250 INCHES MINIMUM AND 7.750 INCHES MAXIMUM IN
shank_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
detent_quantity2
style_designatorRING HANDLE
surface_treatmentZINC SHANK
pin_attachment_typeRING AND CABLE LANYARD W/TERMINATIONS
NSN5315-01-359-4710
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SW25607-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GRIP LENGTH: 4.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC SHANK
•
MATERIAL: STEEL COMP 1039 OR STEEL COMP 1040 SHANK
•
PIN ATTACHMENT TYPE: RING AND CABLE LANYARD W/TERMINATIONS
•
SHANK DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RING HANDLE
•
DETENT QUANTITY: 2
•
LANYARD LENGTH: 7.250 INCHES MINIMUM AND 7.750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
GRIP LENGTH4.000 INCHES NOMINAL IN
SURFACE TREATMENTZINC SHANK
MATERIALSTEEL COMP 1039 OR STEEL COMP 1040 SHANK
PIN ATTACHMENT TYPERING AND CABLE LANYARD W/TERMINATIONS
SHANK DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
STYLE DESIGNATORRING HANDLE
DETENT QUANTITY2
LANYARD LENGTH7.250 INCHES MINIMUM AND 7.750 INCHES MAXIMUM IN
ACTUATION TYPEPULL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
4717Interchangeable
interchangeable cross-reference
interchangeable
DP5S3Interchangeable
interchangeable cross-reference
interchangeable
3137Interchangeable
interchangeable cross-reference
interchangeable
17C920001-133Interchangeable
interchangeable cross-reference
interchangeable
D173339Interchangeable
interchangeable cross-reference
interchangeable
49503BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SW25607-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SW25607-4?
SW25607-4 is a PIN,QUICK RELEASE.
What parts can replace SW25607-4?
There are 23 known substitutes for SW25607-4: 4717, DP5S3, 3137 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SW25607-4?
SW25607-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-359-4710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SW25607-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026