SW160-3 — SWITCH,PULL

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

SW160-3: SWITCH,PULL.

The SWITCH,PULL is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 4.887 INCHES NOMINAL IN, center_hole_diameter: 4.594 INCHES MINIMUM AND 4.624 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-585-1070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SW160-3

NSN: 5331-00-585-1070
NIINs: 005851070, 010902693, 014087918
FSC: 5331 — O-ring
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hardness_rating	65.0 SHORE DUROMETER A NOMINAL
outside_diameter	4.887 INCHES NOMINAL IN
center_hole_diameter	4.594 INCHES MINIMUM AND 4.624 INCHES MAXIMUM IN
elongation_percentage	200 MAXIMUM
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN	5331-00-585-1070

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 4.887 INCHES NOMINAL IN

•

HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 200 MAXIMUM

•

CENTER HOLE DIAMETER: 4.594 INCHES MINIMUM AND 4.624 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER	4.887 INCHES NOMINAL IN
HARDNESS RATING	65.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	200 MAXIMUM
CENTER HOLE DIAMETER	4.594 INCHES MINIMUM AND 4.624 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 7

AS3578-247Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5331PL1942867Reference document

Same NSN cross-reference

Reference document — Informative reference only

SAE-AS3578Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-247 N506-65Reference document

Same NSN cross-reference

Reference document — Secondary reference

34665-247Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

PRP568-247-4024-65Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy SW160-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SW160-3?

SW160-3 is a SWITCH,PULL.

What parts can replace SW160-3?

There are 7 known substitutes for SW160-3: AS3578-247, 5331PL1942867, SAE-AS3578 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SW160-3?

SW160-3 is cataloged in the U.S. Government catalog under NSN 5331-00-585-1070. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SW160-3 — SWITCH,PULL

Request a Quote — SW160-3