PartsTable
Technical Data Sheet
Download PDF

SW118 FIND 8 — STEM,FLUID VALVE

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

SW118 FIND 8: STEM,FLUID VALVE.

The STEM,FLUID VALVE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, end_item_identification: SEAWOLF CLASS SSN, valve_size_for_which_designed: 0.500 INCHES IN, valve_type_for_which_designed: RELIEF, valve_model_number_for_which_designed: 1571-T. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-381-0370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SW118 FIND 8
NSN: 4820-01-381-0370
NIINs: 013810370, 014503559
FSC: 4820 — Valves, Nonpowered
CAGE: 01343 — ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY (USA)
SPECIFICATIONS
materialNICKEL ALLOY
end_item_identificationSEAWOLF CLASS SSN
valve_size_for_which_designed0.500 INCHES IN
valve_type_for_which_designedRELIEF
valve_model_number_for_which_designed1571-T
NSN4820-01-381-0370
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: SW118 FIND 8 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VALVE TYPE FOR WHICH DESIGNED: RELIEF
•
LARGEST OUTSIDE DIAMETER: 0.560 INCHES NOMINAL IN
•
STEM ACTUATING END TYPE: ROUNDED
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE
•
VALVE SIZE FOR WHICH DESIGNED: 0.500 INCHES IN
•
MATERIAL: NICKEL ALLOY
TECHNICAL CHARACTERISTICS
VALVE TYPE FOR WHICH DESIGNEDRELIEF
LARGEST OUTSIDE DIAMETER0.560 INCHES NOMINAL IN
STEM ACTUATING END TYPEROUNDED
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH7.500 INCHES NOMINAL IN
VALVE SIZE FOR WHICH DESIGNED0.500 INCHES IN
MATERIALNICKEL ALLOY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW THE LATEST REVISION OF MIL-STD-1330
SUBSTITUTES & CROSS-REFERENCES 5
SW118 FIND 8CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B14534.002.127Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SW118-8CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SW118-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
B14534.002.127CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SW118 FIND 8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SW118 FIND 8?
SW118 FIND 8 is a STEM,FLUID VALVE.
What parts can replace SW118 FIND 8?
There are 5 known substitutes for SW118 FIND 8: SW118 FIND 8CP, B14534.002.127, SW118-8CP and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SW118 FIND 8?
SW118 FIND 8 is cataloged in the U.S. Government catalog under NSN 4820-01-381-0370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SW118 FIND 8