PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SV370
SV370 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER OVERALL, hole_diameter: 0.453 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.438 INCHES NOMINAL IN, aperture_diameter: 0.765 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL, cross-sectional_thickness: 0.014 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-918-9540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SV370
NSN: 5330-00-918-9540
FSC: 5330
CAGE: 37619 — MADISON-KIPP CORP (USA)
SPECIFICATIONS
materialCOPPER OVERALL
hole_diameter0.453 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.438 INCHES NOMINAL IN
aperture_diameter0.765 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
cross-sectional_thickness0.014 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR METAL
side_radius_from_gasket_center0.594 INCHES NOMINAL IN
NSN5330-00-918-9540
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SV370 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.014 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.765 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.594 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.453 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER OVERALL
CROSS-SECTIONAL THICKNESS0.014 INCHES NOMINAL IN
APERTURE DIAMETER0.765 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.594 INCHES NOMINAL IN
HOLE DIAMETER0.453 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH2.438 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
18-732Interchangeable
interchangeable cross-reference
interchangeable
BP218Interchangeable
interchangeable cross-reference
interchangeable
24P206534Interchangeable
interchangeable cross-reference
interchangeable
50556Interchangeable
interchangeable cross-reference
interchangeable
SCB69999Interchangeable
interchangeable cross-reference
interchangeable
SPEC966Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SV370?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SV370?
SV370 is a GASKET.
What parts can replace SV370?
There are 18 known substitutes for SV370: 18-732, BP218, 24P206534 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SV370?
SV370 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-918-9540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SV370

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026