PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SUND3324820
SUND3324820 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 0.8750 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-332-4820, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SUND3324820
NSN: 3110-00-332-4820
FSC: 3110
CAGE: STCP8 — SUNDOZ CO.,LTD
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width0.8750 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
shield_quantity2
special_featuresTYPE 143, GRADE 00
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
NSN3110-00-332-4820
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SUND3324820 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: ANGULAR
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
SHIELD QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESTYPE 143, GRADE 00
LUBRICATION MATERIALGREASE
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
SHIELD QUANTITY2
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
10947082Interchangeable
interchangeable cross-reference
interchangeable
908-002Interchangeable
interchangeable cross-reference
interchangeable
BS4-1575P19Interchangeable
interchangeable cross-reference
interchangeable
34-135-1Interchangeable
interchangeable cross-reference
interchangeable
5306Interchangeable
interchangeable cross-reference
interchangeable
5307Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SUND3324820?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SUND3324820?
SUND3324820 is a BEARING,BALL,ANNULAR.
What parts can replace SUND3324820?
There are 27 known substitutes for SUND3324820: 10947082, 908-002, BS4-1575P19 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SUND3324820?
SUND3324820 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-332-4820. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SUND3324820

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026