PartsTable
Technical Data Sheet
Download PDF

SU314-4D-13A — STANDOFF,PLAIN,SNAP-IN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SU314-4D-13A: STANDOFF,PLAIN,SNAP-IN.

The STANDOFF,PLAIN,SNAP-IN is a the manufacturer industrial component. Key specifications include length: 0.562 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, hole_diameter: 0.159 INCHES NOMINAL IN, special_features: FINISH IS ALODINE 1200, style_designator: PROJECTION ONE END, right_projection_length: 0.105 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-612-6504, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SU314-4D-13A
NSN: 5340-01-612-6504
FSC: 5340 — Hardware, Commercial
CAGE: 04729 — UNICORP. (USA)
SPECIFICATIONS
length0.562 INCHES NOMINAL IN
materialALUMINUM ALLOY OVERALL
hole_diameter0.159 INCHES NOMINAL IN
special_featuresFINISH IS ALODINE 1200
style_designatorPROJECTION ONE END
right_projection_length0.105 INCHES NOMINAL IN
right_projection_diameter0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
material_document_and_classificationPER QQ-A-225A COM+2, T3 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL A
NSN5340-01-612-6504
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SU314-4D-13A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.562 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PROJECTION ONE END
•
MATERIAL DOCUMENT AND CLASSIFICATION: PER QQ-A-225A COM+2, T3 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL A
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
RIGHT PROJECTION DIAMETER: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
RIGHT PROJECTION LENGTH: 0.105 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.159 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.562 INCHES NOMINAL IN
STYLE DESIGNATORPROJECTION ONE END
MATERIAL DOCUMENT AND CLASSIFICATIONPER QQ-A-225A COM+2, T3 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL A
SPECIAL FEATURESFINISH IS ALODINE 1200
MATERIALALUMINUM ALLOY OVERALL
RIGHT PROJECTION DIAMETER0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
RIGHT PROJECTION LENGTH0.105 INCHES NOMINAL IN
HOLE DIAMETER0.159 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SU314-4D-13A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SU314-4D-13A?
SU314-4D-13A is a STANDOFF,PLAIN,SNAP-IN.
What is the NSN for SU314-4D-13A?
SU314-4D-13A is cataloged in the U.S. Government catalog under NSN 5340-01-612-6504. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SU314-4D-13A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.