PartsTable
Technical Data Sheet
PartsTable / COMPONENT / STYLE610
STYLE610 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER OVERALL, outside_diameter: 6.875 INCHES NOMINAL IN, aperture_diameter: 6.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-308-9785, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STYLE610
NSN: 5330-00-308-9785
FSC: 5330
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER OVERALL
outside_diameter6.875 INCHES NOMINAL IN
aperture_diameter6.250 INCHES NOMINAL IN
cross-sectional_thickness0.312 INCHES NOMINAL IN
NSN5330-00-308-9785
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: STYLE610 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.312 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.875 INCHES NOMINAL IN
•
APERTURE DIAMETER: 6.250 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.312 INCHES NOMINAL IN
OUTSIDE DIAMETER6.875 INCHES NOMINAL IN
APERTURE DIAMETER6.250 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
948Interchangeable
interchangeable cross-reference
interchangeable
135537Interchangeable
interchangeable cross-reference
interchangeable
SC-B-99667Interchangeable
interchangeable cross-reference
interchangeable
AS10582-002Interchangeable
interchangeable cross-reference
interchangeable
149117Interchangeable
interchangeable cross-reference
interchangeable
149117H1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy STYLE610?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is STYLE610?
STYLE610 is a GASKET.
What parts can replace STYLE610?
There are 17 known substitutes for STYLE610: 948, 135537, SC-B-99667 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for STYLE610?
STYLE610 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-308-9785. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — STYLE610

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026