PartsTable
Technical Data Sheet
PartsTable / COMPONENT / STYLE10 1-3/16X1-7/16X3/32NON AS
STYLE10 1-3/16X1-7/16X3/32NON AS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STYLE10 1-3/16X1-7/16X3/32NON AS is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-469-2159, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STYLE10 1-3/16X1-7/16X3/32NON AS
NSN: 5330-01-469-2159
FSC: 5330
CAGE: 76281 — MELRATH GASKET (USA)
SPECIFICATIONS
Part NumberSTYLE10 1-3/16X1-7/16X3/32NON AS
NSN5330-01-469-2159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: STYLE10 1-3/16X1-7/16X3/32NON AS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
OUTSIDE DIAMETER: 1.438 INCHES MINIMUM AND 1.469 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 1.157 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
TECHNICAL CHARACTERISTICS (FLIS)
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OUTSIDE DIAMETER1.438 INCHES MINIMUM AND 1.469 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER1.157 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
66624Interchangeable
interchangeable cross-reference
interchangeable
10-321800-2Interchangeable
interchangeable cross-reference
interchangeable
64518Interchangeable
interchangeable cross-reference
interchangeable
D7126Interchangeable
interchangeable cross-reference
interchangeable
3S2791G238A9SInterchangeable
interchangeable cross-reference
interchangeable
P26C1P6A-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy STYLE10 1-3/16X1-7/16X3/32NON AS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is STYLE10 1-3/16X1-7/16X3/32NON AS?
STYLE10 1-3/16X1-7/16X3/32NON AS is a STYLE10 1-3/16X1-7/16X3/32NON AS.
What parts can replace STYLE10 1-3/16X1-7/16X3/32NON AS?
There are 6 known substitutes for STYLE10 1-3/16X1-7/16X3/32NON AS: 66624, 10-321800-2, 64518 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for STYLE10 1-3/16X1-7/16X3/32NON AS?
STYLE10 1-3/16X1-7/16X3/32NON AS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-469-2159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — STYLE10 1-3/16X1-7/16X3/32NON AS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026