PartsTable
Technical Data Sheet
Download PDF

STYLE 5888 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

STYLE 5888: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, rim_surface_width: 0.125 INCHES NOMINAL IN, peripheral_diameter: 3.005 INCHES NOMINAL IN, center_hole_diameter: 2.250 INCHES NOMINAL IN, cross-sectional_height: 0.438 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-585-7713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STYLE 5888
NSN: 5330-00-585-7713
FSC: 5330 — Packing and Gasket Materials
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
rim_surface_width0.125 INCHES NOMINAL IN
peripheral_diameter3.005 INCHES NOMINAL IN
center_hole_diameter2.250 INCHES NOMINAL IN
cross-sectional_height0.438 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleFLANGE
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-585-7713
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: STYLE 5888 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.438 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
RIM SURFACE WIDTH: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
PERIPHERAL DIAMETER: 3.005 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
RIM SURFACE WIDTH0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
PERIPHERAL DIAMETER3.005 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
D04010104Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
16786Reference document
Same NSN cross-reference
Reference document — Secondary reference
4200S39005PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy STYLE 5888?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is STYLE 5888?
STYLE 5888 is a PACKING,PREFORMED.
What parts can replace STYLE 5888?
There are 3 known substitutes for STYLE 5888: D04010104, 16786, 4200S39005PC6. Substitute compatibility should be verified for your specific system.
What is the NSN for STYLE 5888?
STYLE 5888 is cataloged in the U.S. Government catalog under NSN 5330-00-585-7713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — STYLE 5888