STSKJ101-08C015 — BEARING,SLEEVE

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

STSKJ101-08C015: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OUTER LAYER, corner_shape: UNDERCUT LEFT FLANGE BODY CORNER, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 0.5162 INCHES MINIMUM AND 0.5312 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY, hardness_rating: 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-477-9151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

STSKJ101-08C015

NSN: 3120-00-477-9151
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 630 OUTER LAYER
corner_shape	UNDERCUT LEFT FLANGE BODY CORNER
flange_width	0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length	0.5162 INCHES MINIMUM AND 0.5312 INCHES MAXIMUM IN
surface_finish	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
hardness_rating	27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
style_designator	SOLID, EXTERNAL FLANGE ONE END
surface_treatment	PASSIVATE OUTER LAYER
body_inside_diameter	0.5005 INCHES MINIMUM AND 0.5015 INCHES MAXIMUM IN
body_outside_diameter	0.6260 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
flange_outside_diameter	0.9800 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
NSN	3120-00-477-9151

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY

•

CORNER SHAPE: SQUARE INSIDE RIGHT CORNER

TECHNICAL CHARACTERISTICS

SURFACE FINISH	125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH	125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER

SUBSTITUTES & CROSS-REFERENCES 5

FBJW16TC20M15Reference document

Same NSN cross-reference

Reference document — Secondary reference

KDJ08C015-241Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

32FB08C15Reference document

Same NSN cross-reference

Reference document — Secondary reference

ATLF08SS15Reference document

Same NSN cross-reference

Reference document — Secondary reference

722108015Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy STSKJ101-08C015?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is STSKJ101-08C015?

STSKJ101-08C015 is a BEARING,SLEEVE.

What parts can replace STSKJ101-08C015?

There are 5 known substitutes for STSKJ101-08C015: FBJW16TC20M15, KDJ08C015-241, 32FB08C15 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for STSKJ101-08C015?

STSKJ101-08C015 is cataloged in the U.S. Government catalog under NSN 3120-00-477-9151. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

STSKJ101-08C015 — BEARING,SLEEVE

Request a Quote — STSKJ101-08C015