PartsTable
Technical Data Sheet
PartsTable / COMPONENT / STD823-3
STD823-3 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1070 OVERALL, hole_diameter: 0.901 INCHES NOMINAL IN, overall_height: 0.080 INCHES NOMINAL IN, outside_diameter: 1.159 INCHES NOMINAL IN, special_features: 24 EQUALLY SPACED DIMPLES, material_thickness: 0.013 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-821-8338, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STD823-3
NSN: 5310-00-821-8338
FSC: 5310
CAGE: 81579 — MASON ELECTRIC CO. DBA MASON CONTROLS (USA)
SPECIFICATIONS
materialSTEEL COMP 1070 OVERALL
hole_diameter0.901 INCHES NOMINAL IN
overall_height0.080 INCHES NOMINAL IN
outside_diameter1.159 INCHES NOMINAL IN
special_features24 EQUALLY SPACED DIMPLES
material_thickness0.013 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-821-8338
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: STD823-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.013 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.159 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.901 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1070 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES24 EQUALLY SPACED DIMPLES
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.013 INCHES NOMINAL IN
OUTSIDE DIAMETER1.159 INCHES NOMINAL IN
HOLE DIAMETER0.901 INCHES NOMINAL IN
MATERIALSTEEL COMP 1070 OVERALL
OVERALL HEIGHT0.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
E4APC04Interchangeable
interchangeable cross-reference
interchangeable
8233Interchangeable
interchangeable cross-reference
interchangeable
115321Interchangeable
interchangeable cross-reference
interchangeable
KCI-100RInterchangeable
interchangeable cross-reference
interchangeable
MIL-B-10743Interchangeable
interchangeable cross-reference
interchangeable
ML161-AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy STD823-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is STD823-3?
STD823-3 is a WASHER,SPRING TENSION.
What parts can replace STD823-3?
There are 21 known substitutes for STD823-3: E4APC04, 8233, 115321 and 18 more. Substitute compatibility should be verified for your specific system.
Is STD823-3 still available?
STD823-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — STD823-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026