STD2348-10 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

STD2348-10: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.037 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-065-8905, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

STD2348-10

NSN: 5340-01-065-8905
FSC: 5340 — Hardware, Commercial
CAGE: K1987 — BAE SYSTEMS PLC (GBR)

SPECIFICATIONS

diameter	0.203 INCHES NOMINAL IN
material	RUBBER CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.037 INCHES NOMINAL IN
loop_inside_diameter	0.625 INCHES NOMINAL IN
cushioning_environmental_protection	WEATHER RESISTANT
distance_from_loop_center_to_tongue_end	0.988 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.770 INCHES NOMINAL IN
NSN	5340-01-065-8905

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.203 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.037 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.988 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.770 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	WEATHER RESISTANT
STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.203 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.037 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.988 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.770 INCHES NOMINAL IN
MATERIAL	STEEL BAND
MATERIAL	RUBBER CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

KB251K0054-000Reference document

Same NSN cross-reference

Reference document — Secondary reference

STD23Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy STD2348-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is STD2348-10?

STD2348-10 is a CLAMP,LOOP.

What parts can replace STD2348-10?

There are 2 known substitutes for STD2348-10: KB251K0054-000, STD23. Substitute compatibility should be verified for your specific system.

What is the NSN for STD2348-10?

STD2348-10 is cataloged in the U.S. Government catalog under NSN 5340-01-065-8905. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

STD2348-10 — CLAMP,LOOP

Request a Quote — STD2348-10