PartsTable
Technical Data Sheet
PartsTable / COMPONENT / STD-500-006 REV E
STD-500-006 REV E ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

MODIFICATION KIT,MARINE HARDWARE. Key specifications include material: STEEL COMP 630 OR STEEL COMP 632 SHANK, grip_length: 1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM IN, head_diameter: 0.640 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN, actuation_type: PULL AND PUSH, shank_diameter: 0.4970 INCHES MINIMUM AND 0.4985 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM SPINDLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-687-0551, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STD-500-006 REV E
NSN: 5330-01-687-0551
FSC: 5330
CAGE: 1T3Z4 — AUSTAL USA, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OR STEEL COMP 632 SHANK
grip_length1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM IN
head_diameter0.640 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
actuation_typePULL AND PUSH
shank_diameter0.4970 INCHES MINIMUM AND 0.4985 INCHES MAXIMUM IN
detent_quantity2
hardness_rating40.0 ROCKWELL C MINIMUM SPINDLE
actuation_methodPUSH BUTTON
special_featuresCOMPONENT QUANTITY: PRINTED WIRING BOARD 1, MICROCIRCUIT 27, CAPACITOR 9, RESISTOR 21, OSCILLATOR 1, TRANSISTOR 1, DIODE 1, CONNECTOR 9
style_designatorL HANDLE
features_providedELECTROSTATIC SENSITIVE
surface_treatmentPASSIVATE SHANK
NSN5330-01-687-0551
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: STD-500-006 REV E MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
STD-500-006 REV E ITEM 002Interchangeable
interchangeable cross-reference
interchangeable
STD-500-005 REV AInterchangeable
interchangeable cross-reference
interchangeable
162411Interchangeable
interchangeable cross-reference
interchangeable
162563Interchangeable
interchangeable cross-reference
interchangeable
STD-500-006 REV EInterchangeable
interchangeable cross-reference
interchangeable
STD-500-008 REV AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy STD-500-006 REV E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is STD-500-006 REV E?
STD-500-006 REV E is a MODIFICATION KIT,MARINE HARDWARE.
What parts can replace STD-500-006 REV E?
There are 12 known substitutes for STD-500-006 REV E: STD-500-006 REV E ITEM 002, STD-500-005 REV A, 162411 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for STD-500-006 REV E?
STD-500-006 REV E is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-687-0551. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — STD-500-006 REV E

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026