PartsTable
Technical Data Sheet
Download PDF

STAR-GS-8E-M1 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

STAR-GS-8E-M1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.265 INCHES NOMINAL IN, material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM CUSHION, overall_width: 0.50 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.06 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-729-2014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STAR-GS-8E-M1
NSN: 5340-01-729-2014
FSC: 5340 — Hardware, Commercial
CAGE: 02WC8 — STAR TECHNOLOGIES LLC (USA)
SPECIFICATIONS
diameter0.265 INCHES NOMINAL IN
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM CUSHION
overall_width0.50 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_diameter0.06 INCHES NOMINAL IN
surface_treatmentZINC BUCKLE/CLIP
material_thickness0.06 INCHES NOMINAL IN
loop_inside_diameter0.50 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.915 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.665 INCHES NOMINAL IN
NSN5340-01-729-2014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: STAR-GS-8E-M1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.06 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.265 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.06 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.915 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BUCKLE/CLIP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.06 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.265 INCHES NOMINAL IN
OVERALL WIDTH0.50 INCHES NOMINAL IN
MATERIAL THICKNESS0.06 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.915 INCHES NOMINAL IN
SURFACE TREATMENTZINC BUCKLE/CLIP
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.665 INCHES NOMINAL IN
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM CUSHION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3225T404Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy STAR-GS-8E-M1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is STAR-GS-8E-M1?
STAR-GS-8E-M1 is a CLAMP,LOOP.
What parts can replace STAR-GS-8E-M1?
There is 1 known substitute for STAR-GS-8E-M1: 3225T404. Substitute compatibility should be verified for your specific system.
What is the NSN for STAR-GS-8E-M1?
STAR-GS-8E-M1 is cataloged in the U.S. Government catalog under NSN 5340-01-729-2014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — STAR-GS-8E-M1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.