PartsTable
Technical Data Sheet
Download PDF

ST9M588WDG64 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST9M588WDG64: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_diameter: 0.063 INCHES NOMINAL IN, loop_inside_diameter: 4.000 INCHES NOMINAL IN, end_item_identification: F-15 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-583-4526, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST9M588WDG64
NSN: 5340-01-583-4526
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_diameter0.063 INCHES NOMINAL IN
loop_inside_diameter4.000 INCHES NOMINAL IN
end_item_identificationF-15 AIRCRAFT
distance_from_loop_center_to_tongue_end2.795 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.500 INCHES NOMINAL IN
NSN5340-01-583-4526
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST9M588WDG64 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.063 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.795 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.063 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.795 INCHES NOMINAL IN
END ITEM IDENTIFICATIONF-15 AIRCRAFT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
LOOP INSIDE DIAMETER4.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
S663WDG64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST9M588WDG64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M588WDG64?
ST9M588WDG64 is a CLAMP,LOOP.
What parts can replace ST9M588WDG64?
There is 1 known substitute for ST9M588WDG64: S663WDG64. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M588WDG64?
ST9M588WDG64 is cataloged in the U.S. Government catalog under NSN 5340-01-583-4526. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST9M588WDG64