PartsTable
Technical Data Sheet
Download PDF

ST9M588WDG54 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST9M588WDG54: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY BAND, overall_width: 0.5 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, loop_inside_diameter: 3.36 INCHES MINIMUM AND 3.39 INCHES MAXIMUM IN, end_item_identification: AN/APG-82(V). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-647-7098, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST9M588WDG54
NSN: 5340-01-647-7098
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY BAND
overall_width0.5 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
loop_inside_diameter3.36 INCHES MINIMUM AND 3.39 INCHES MAXIMUM IN
end_item_identificationAN/APG-82(V)
material_document_and_classificationAMS-QQ-A-2505 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end2.482 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.187 INCHES NOMINAL IN
NSN5340-01-647-7098
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST9M588WDG54 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-2505 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.482 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.187 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-2505 ASSN STD SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.5 INCHES NOMINAL IN
MATERIAL THICKNESS0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.482 INCHES NOMINAL IN
END ITEM IDENTIFICATIONAN/APG-82(V)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.187 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY BAND
LOOP INSIDE DIAMETER3.36 INCHES MINIMUM AND 3.39 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
S663WDG54Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TA0220060WCR54Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST9M588WDG54?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M588WDG54?
ST9M588WDG54 is a CLAMP,LOOP.
What parts can replace ST9M588WDG54?
There are 2 known substitutes for ST9M588WDG54: S663WDG54, TA0220060WCR54. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M588WDG54?
ST9M588WDG54 is cataloged in the U.S. Government catalog under NSN 5340-01-647-7098. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST9M588WDG54