The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 0.091 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-445-5373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ST9M5810102
NSN:5340-01-445-5373 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
END RADIUS
first_leg_width
1.000 INCHES NOMINAL IN
first_leg_length
0.091 INCHES NOMINAL IN
second_leg_style
CORNER RADIUS
second_leg_width
1.000 INCHES NOMINAL IN
special_features
ITEM HAS LOCKWIRE HOLE, DIA 0.094PLUS 0.005 IN.; BRACKET IS INTENDED TOATTACHED W/RIVETS; HAS CLIP NUT P/N ST3M523C3M AND HAS CONVENTIONAL(NOT INVERTED) INSTALLATION IN
style_designator
ANGLE
second_leg_length
0.075 INCHES NOMINAL IN
surface_treatment
PRIMER AND CHROMATE
mounting_hole_type
PLAIN
NSN
5340-01-445-5373
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.150 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE
•
SECOND LEG WIDTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
1.150 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE
SECOND LEG WIDTH
1.000 INCHES NOMINAL IN
SECOND LEG LENGTH
0.075 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE
ONE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M5810102?
ST9M5810102 is a BRACKET,ANGLE.
What parts can replace ST9M5810102?
There is 1 known substitute for ST9M5810102: ST9M581AC2. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M5810102?
ST9M5810102 is cataloged in the U.S. Government catalog under NSN 5340-01-445-5373. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.