The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-341-4170, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ST9M580C1W
NSN:5340-01-341-4170 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
CORNER RADIUS
first_leg_width
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
first_leg_length
0.750 INCHES NOMINAL IN
second_leg_style
CORNER RADIUS
second_leg_width
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
special_features
INCLUDES TWO CLIP NUTS
style_designator
ANGLE
second_leg_length
0.750 INCHES NOMINAL IN
surface_treatment
PRIMER
mounting_hole_type
PLAIN
NSN
5340-01-341-4170
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 425,CAGEC 76301 MFR REF SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
425,CAGEC 76301 MFR REF SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SECOND LEG WIDTH
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M580C1W?
ST9M580C1W is a BRACKET,ANGLE.
What parts can replace ST9M580C1W?
There is 1 known substitute for ST9M580C1W: 10113178. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M580C1W?
ST9M580C1W is cataloged in the U.S. Government catalog under NSN 5340-01-341-4170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.