PartsTable
Technical Data Sheet
Download PDF

ST9M509WPH15-01 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST9M509WPH15-01: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.030 INCHES NOMINAL IN, loop_inside_diameter: 0.938 INCHES NOMINAL IN, end_item_identification: F-15 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-582-3700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST9M509WPH15-01
NSN: 5340-01-582-3700
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.030 INCHES NOMINAL IN
loop_inside_diameter0.938 INCHES NOMINAL IN
end_item_identificationF-15 AIRCRAFT
center_to_center_distance_between_loop_and_mounting_hole0.982 INCHES NOMINAL IN
NSN5340-01-582-3700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST9M509WPH15-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.982 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 631 BAND
•
LOOP INSIDE DIAMETER: 0.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
END ITEM IDENTIFICATIONF-15 AIRCRAFT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.982 INCHES NOMINAL IN
MATERIALSTEEL COMP 631 BAND
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
LOOP INSIDE DIAMETER0.938 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
TA13C02WPH15-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST9M509WPH15-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M509WPH15-01?
ST9M509WPH15-01 is a CLAMP,LOOP.
What parts can replace ST9M509WPH15-01?
There is 1 known substitute for ST9M509WPH15-01: TA13C02WPH15-01. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M509WPH15-01?
ST9M509WPH15-01 is cataloged in the U.S. Government catalog under NSN 5340-01-582-3700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST9M509WPH15-01