The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-104-4959, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ST9M496-C2WA
NSN:5340-01-104-4959 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 2024
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
CORNER RADIUS
first_leg_width
1.000 INCHES NOMINAL IN
first_leg_length
0.750 INCHES NOMINAL IN
second_leg_style
CORNER RADIUS
second_leg_width
1.300 INCHES NOMINAL IN
special_features
RIGHT HAND AND INVERTED CLIP NUT INSTALLATION
style_designator
ANGLE
second_leg_length
0.800 INCHES NOMINAL IN
surface_treatment
CHROMATE AND PRIMER
mounting_hole_type
PLAIN
NSN
5340-01-104-4959
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.300 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.300 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.250 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.500 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS
0.250 INCHES NOMINAL IN
SECOND LEG WIDTH
1.300 INCHES NOMINAL IN
SECOND LEG LENGTH
0.800 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M496-C2WA?
ST9M496-C2WA is a BRACKET,ANGLE.
What parts can replace ST9M496-C2WA?
There are 2 known substitutes for ST9M496-C2WA: 10117636, ST9M496-110. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M496-C2WA?
ST9M496-C2WA is cataloged in the U.S. Government catalog under NSN 5340-01-104-4959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.