PartsTable
Technical Data Sheet
Download PDF

ST9M453-2 — FASTENER,SLIDE,INTERLOCKING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST9M453-2: FASTENER,SLIDE,INTERLOCKING.

The FASTENER,SLIDE,INTERLOCKING is a the manufacturer industrial component. Key specifications include length: 166.750 INCHES MINIMUM AND 169.250 INCHES MAXIMUM IN, material: COPPER ALLOY STOP, stop_type: OPEN TOP, tape_width: 0.750 INCHES NOMINAL IN, slider_pull_type: SHORT TAB, special_features: CHAIN SUPPORTED BY A STUFFER CORD. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-540-3797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST9M453-2
NSN: 5325-00-540-3797
FSC: 5325 — Fastening Devices
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
length166.750 INCHES MINIMUM AND 169.250 INCHES MAXIMUM IN
materialCOPPER ALLOY STOP
stop_typeOPEN TOP
tape_width0.750 INCHES NOMINAL IN
slider_quantity1
slider_pull_typeSHORT TAB
special_featuresCHAIN SUPPORTED BY A STUFFER CORD
surface_treatmentENAMEL SLIDER PULL
locking_device_typeAUTOMATIC
slider_pull_quantity1
slider_reversibilityNONREVERSIBLE
fastener_tape_extension_length1.000 INCHES NOMINAL IN
NSN5325-00-540-3797
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST9M453-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER TAPE EXTENSION LENGTH: 1.000 INCHES NOMINAL IN
•
STOP TYPE: CLOSED BOTTOM
•
LENGTH: 166.750 INCHES MINIMUM AND 169.250 INCHES MAXIMUM IN
•
TAPE WIDTH: 0.750 INCHES NOMINAL IN
•
LOCKING DEVICE TYPE: AUTOMATIC
•
SLIDER PULL TYPE: SHORT TAB
•
SLIDER PULL QUANTITY: 1
TECHNICAL CHARACTERISTICS
FASTENER TAPE EXTENSION LENGTH1.000 INCHES NOMINAL IN
STOP TYPECLOSED BOTTOM
STOP TYPEOPEN TOP
LENGTH166.750 INCHES MINIMUM AND 169.250 INCHES MAXIMUM IN
TAPE WIDTH0.750 INCHES NOMINAL IN
LOCKING DEVICE TYPEAUTOMATIC
SLIDER PULL TYPESHORT TAB
SLIDER PULL QUANTITY1
COLORWHITE OVERALL
SPECIAL FEATURESCHAIN SUPPORTED BY A STUFFER CORD
OTHER ITEMS IN FSC 5325 — Fastening Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317
SUBSTITUTES & CROSS-REFERENCES 1
1062020Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST9M453-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M453-2?
ST9M453-2 is a FASTENER,SLIDE,INTERLOCKING.
What parts can replace ST9M453-2?
There is 1 known substitute for ST9M453-2: 1062020. Substitute compatibility should be verified for your specific system.
What is the NSN for ST9M453-2?
ST9M453-2 is cataloged in the U.S. Government catalog under NSN 5325-00-540-3797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST9M453-2