ST9M429P100C172 — CATCH,FLUSH

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

ST9M429P100C172: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.380 INCHES NOMINAL IN, length: 1.380 INCHES NOMINAL IN, special_features: MATL:BODY STEEL,BUTTON ALUM. ALLOY,GASKET SYN RUBBER;BUTTON ANODIZED;BODY PASSIVATED, style_designator: BUTTON ACTUATOR, bolt_offset_distance: 0.172 INCHES NOMINAL IN, lever_offset_distance: 0.100 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-249-0630, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ST9M429P100C172

NSN: 5340-01-249-0630
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

width	1.380 INCHES NOMINAL IN
length	1.380 INCHES NOMINAL IN
special_features	MATL:BODY STEEL,BUTTON ALUM. ALLOY,GASKET SYN RUBBER;BUTTON ANODIZED;BODY PASSIVATED
style_designator	BUTTON ACTUATOR
bolt_offset_distance	0.172 INCHES NOMINAL IN
lever_offset_distance	0.100 INCHES NOMINAL IN
mounting_hole_diameter	0.128 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width	1.060 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length	1.060 INCHES NOMINAL IN
NSN	5340-01-249-0630

COMPONENT DIAGRAM

KEY FEATURES

•

BOLT OFFSET DISTANCE: 0.172 INCHES NOMINAL IN

•

LENGTH: 1.380 INCHES NOMINAL IN

•

LEVER OFFSET DISTANCE: 0.100 INCHES NOMINAL IN

•

STYLE DESIGNATOR: BUTTON ACTUATOR

•

MOUNTING HOLE DIAMETER: 0.128 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.060 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.060 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

BOLT OFFSET DISTANCE	0.172 INCHES NOMINAL IN
LENGTH	1.380 INCHES NOMINAL IN
LEVER OFFSET DISTANCE	0.100 INCHES NOMINAL IN
STYLE DESIGNATOR	BUTTON ACTUATOR
MOUNTING HOLE DIAMETER	0.128 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	1.060 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	1.060 INCHES NOMINAL IN
SPECIAL FEATURES	MATL:BODY STEEL,BUTTON ALUM. ALLOY,GASKET SYN RUBBER;BUTTON ANODIZED;BODY PASSIVATED
WIDTH	1.380 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

H601P100C172Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HK5L6010P-100C172Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

12QRP21P100C172Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy ST9M429P100C172?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ST9M429P100C172?

ST9M429P100C172 is a CATCH,FLUSH.

What parts can replace ST9M429P100C172?

There are 3 known substitutes for ST9M429P100C172: H601P100C172, HK5L6010P-100C172, 12QRP21P100C172. Substitute compatibility should be verified for your specific system.

What is the NSN for ST9M429P100C172?

ST9M429P100C172 is cataloged in the U.S. Government catalog under NSN 5340-01-249-0630. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ST9M429P100C172 — CATCH,FLUSH

Request a Quote — ST9M429P100C172