The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.998 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: END RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-008-9030, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ST9M380-2N10RW
NSN:5340-00-008-9030 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 2024
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
END RADIUS
first_leg_width
0.998 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
first_leg_length
0.750 INCHES NOMINAL IN
second_leg_style
END RADIUS
second_leg_width
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
special_features
CLINCH NUT LOCATED ON OUTSIDE OF SECOND LEG OF TOP HOLE
style_designator
ANGLE
second_leg_length
0.750 INCHES NOMINAL IN
surface_treatment
CHROMATE
first_leg_thickness
0.063 INCHES NOMINAL IN
NSN
5340-00-008-9030
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
IDENTICAL
SECOND LEG HOLE DIAMETER
0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
SECOND LEG LENGTH
0.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST9M380-2N10RW?
ST9M380-2N10RW is a BRACKET,ANGLE.
What is the NSN for ST9M380-2N10RW?
ST9M380-2N10RW is cataloged in the U.S. Government catalog under NSN 5340-00-008-9030. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.