ST7M389-12-11 — SLEEVE,SEAL,COUPLER

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

ST7M389-12-11: SLEEVE,SEAL,COUPLER.

The SLEEVE,SEAL,COUPLER is a the manufacturer industrial component. Key specifications include material: GLASS FIBER OVERALL, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, cross-sectional_length: 2.375 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN, end_item_identification: F-15EX, cross-sectional_shape_style: SPHERICAL, cross_section_inside_diameter: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-723-9241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ST7M389-12-11

NSN: 5330-01-723-9241
FSC: 5330 — Packing and Gasket Materials
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

material	GLASS FIBER OVERALL
temp_rating	-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
cross-sectional_length	2.375 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
end_item_identification	F-15EX
cross-sectional_shape_style	SPHERICAL
cross_section_inside_diameter	1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
cross_section_outside_diameter	1.58 INCHES NOMINAL IN
NSN	5330-01-723-9241

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-9084,IMPREGNATION OF THE INNER PLY SHALL BE SUCH THAT THE INSIDE DIAMETER OF THE FINISHED,CURED SLEEVE SHALL BE SMOOTH, WITH FULL COVERAGE OF WEAVE INTERSTICES MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

CROSS-SECTIONAL SHAPE STYLE: SPHERICAL

•

CROSS-SECTIONAL LENGTH: 2.375 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN

•

CROSS SECTION INSIDE DIAMETER: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN

•

CROSS SECTION OUTSIDE DIAMETER: 1.58 INCHES NOMINAL IN

•

MATERIAL: GLASS FIBER OVERALL

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-C-9084,IMPREGNATION OF THE INNER PLY SHALL BE SUCH THAT THE INSIDE DIAMETER OF THE FINISHED,CURED SLEEVE SHALL BE SMOOTH, WITH FULL COVERAGE OF WEAVE INTERSTICES MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE	SPHERICAL
CROSS-SECTIONAL LENGTH	2.375 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
CROSS SECTION INSIDE DIAMETER	1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER	1.58 INCHES NOMINAL IN
END ITEM IDENTIFICATION	F-15EX
MATERIAL	GLASS FIBER OVERALL
MATERIAL	RUBBER SILICONE CLASS Q INTERNAL

SUBSTITUTES & CROSS-REFERENCES 4

5737-12-11Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SF11-1223-12-11Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AD1199-12-11Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ST7M389Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy ST7M389-12-11?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ST7M389-12-11?

ST7M389-12-11 is a SLEEVE,SEAL,COUPLER.

What parts can replace ST7M389-12-11?

There are 4 known substitutes for ST7M389-12-11: 5737-12-11, SF11-1223-12-11, AD1199-12-11 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for ST7M389-12-11?

ST7M389-12-11 is cataloged in the U.S. Government catalog under NSN 5330-01-723-9241. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ST7M389-12-11 — SLEEVE,SEAL,COUPLER

Request a Quote — ST7M389-12-11