PartsTable
Technical Data Sheet
Download PDF

ST7M384 — PLUG,TUBE FITTING,THREADED

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

ST7M384: PLUG,TUBE FITTING,THREADED.

The PLUG,TUBE FITTING,THREADED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, seat_angle: 37.0 DEGREES, head_height: 0.256 INCHES NOMINAL IN, thread_class: 2A EXTERNAL A, overall_length: 0.812 INCHES NOMINAL IN, connection_style: FLARED. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-077-7995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST7M384
NSN: 4730-01-077-7995
NIINs: 010777995, 011940172
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
seat_angle37.0 DEGREES
head_height0.256 INCHES NOMINAL IN
thread_class2A EXTERNAL A
overall_length0.812 INCHES NOMINAL IN
connection_styleFLARED
style_designatorPLUG, TUBE FITTING FLARED (NOTE: DRILLED HOLE IS OPTIONAL, SHOULD NOT BE CONSIDERED AS A SEPARATING CHARACTERISTIC)
thread_directionRIGHT-HAND EXTERNAL
features_providedSAFETY WIRE HOLE
surface_treatmentANODIZE OVERALL
nominal_thread_size0.562 INCHES EXTERNAL IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) EXTERNAL
NSN4730-01-077-7995
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: ST7M384 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.194 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CONNECTION STYLE: FLARED
•
STYLE DESIGNATOR: PLUG, TUBE FITTING FLARED (NOTE: DRILLED HOLE IS OPTIONAL, SHOULD NOT BE CONSIDERED AS A SEPARATING CHARACTERISTIC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/4,TEMPER T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6,TEMPER T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6,TEMPER T851 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/9,TEMPER T73 FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
FEATURES PROVIDED: SAFETY WIRE HOLE
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.194 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CONNECTION STYLEFLARED
STYLE DESIGNATORPLUG, TUBE FITTING FLARED (NOTE: DRILLED HOLE IS OPTIONAL, SHOULD NOT BE CONSIDERED AS A SEPARATING CHARACTERISTIC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/4,TEMPER T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6,TEMPER T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6,TEMPER T851 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/9,TEMPER T73 FED SPEC 3RD MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.734 INCHES NOMINAL IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
FEATURES PROVIDEDSAFETY WIRE HOLE
THREAD DIRECTIONRIGHT-HAND EXTERNAL
NOMINAL THREAD SIZE0.438 INCHES EXTERNAL IN
SUBSTITUTES & CROSS-REFERENCES 1
ST7M384D4-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST7M384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST7M384?
ST7M384 is a PLUG,TUBE FITTING,THREADED.
What parts can replace ST7M384?
There is 1 known substitute for ST7M384: ST7M384D4-1. Substitute compatibility should be verified for your specific system.
What is the NSN for ST7M384?
ST7M384 is cataloged in the U.S. Government catalog under NSN 4730-01-077-7995. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST7M384

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.