PartsTable
Technical Data Sheet
Download PDF

ST7M367-16-18 — SLEEVE,SEAL,COUPLER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST7M367-16-18: SLEEVE,SEAL,COUPLER.

The SLEEVE,SEAL,COUPLER is a the manufacturer industrial component. Key specifications include material: GLASS FIBER AND RUBBER SILICONE CLASS Q OVERALL, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, special_features: LENGTH 4.500 INCHES IN, end_item_identification: 19F, cross-sectional_shape_style: SPHERICAL, cross_section_inside_diameter: 3.97 INCHES MINIMUM AND 4.03 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-723-3982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST7M367-16-18
NSN: 5330-01-723-3982
FSC: 5330 — Packing and Gasket Materials
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialGLASS FIBER AND RUBBER SILICONE CLASS Q OVERALL
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
special_featuresLENGTH 4.500 INCHES IN
end_item_identification19F
cross-sectional_shape_styleSPHERICAL
cross_section_inside_diameter3.97 INCHES MINIMUM AND 4.03 INCHES MAXIMUM IN
cross_section_outside_diameter4.16 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencySLEEVE,SEAL,COUPLER
NSN5330-01-723-3982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST7M367-16-18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL SHAPE STYLE: SPHERICAL
•
CROSS SECTION INSIDE DIAMETER: 3.97 INCHES MINIMUM AND 4.03 INCHES MAXIMUM IN
•
CROSS SECTION OUTSIDE DIAMETER: 4.16 INCHES NOMINAL IN
•
MATERIAL: GLASS FIBER AND RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
CROSS-SECTIONAL SHAPE STYLESPHERICAL
CROSS SECTION INSIDE DIAMETER3.97 INCHES MINIMUM AND 4.03 INCHES MAXIMUM IN
SPECIAL FEATURESLENGTH 4.500 INCHES IN
CROSS SECTION OUTSIDE DIAMETER4.16 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSLEEVE,SEAL,COUPLER
END ITEM IDENTIFICATION19F
MATERIALGLASS FIBER AND RUBBER SILICONE CLASS Q OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
ST7M367Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST7M367-16-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST7M367-16-18?
ST7M367-16-18 is a SLEEVE,SEAL,COUPLER.
What parts can replace ST7M367-16-18?
There is 1 known substitute for ST7M367-16-18: ST7M367. Substitute compatibility should be verified for your specific system.
What is the NSN for ST7M367-16-18?
ST7M367-16-18 is cataloged in the U.S. Government catalog under NSN 5330-01-723-3982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST7M367-16-18