PartsTable
Technical Data Sheet
Download PDF

ST7M335-18 — RING,WIPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST7M335-18: RING,WIPER.

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 1.603 INCHES NOMINAL IN, outside_diameter: 1.870 INCHES NOMINAL IN, material_thickness: 0.190 INCHES NOMINAL IN, cross-sectional_shape_style: COUNTERBORED AND BEVELED FACE. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-179-0078, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST7M335-18
NSN: 5330-01-179-0078
FSC: 5330 — Packing and Gasket Materials
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter1.603 INCHES NOMINAL IN
outside_diameter1.870 INCHES NOMINAL IN
material_thickness0.190 INCHES NOMINAL IN
cross-sectional_shape_styleCOUNTERBORED AND BEVELED FACE
material_document_and_classificationUNABLE TO DECODE
NSN5330-01-179-0078
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST7M335-18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
CROSS-SECTIONAL SHAPE STYLE: COUNTERBORED AND BEVELED FACE
•
OUTSIDE DIAMETER: 1.870 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.190 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.603 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
CROSS-SECTIONAL SHAPE STYLECOUNTERBORED AND BEVELED FACE
OUTSIDE DIAMETER1.870 INCHES NOMINAL IN
MATERIAL THICKNESS0.190 INCHES NOMINAL IN
INSIDE DIAMETER1.603 INCHES NOMINAL IN
RING STYLECONCENTRIC
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
10116823Reference document
Same NSN cross-reference
Reference document — Informative reference only
S30396-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy ST7M335-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST7M335-18?
ST7M335-18 is a RING,WIPER.
What parts can replace ST7M335-18?
There are 2 known substitutes for ST7M335-18: 10116823, S30396-18. Substitute compatibility should be verified for your specific system.
What is the NSN for ST7M335-18?
ST7M335-18 is cataloged in the U.S. Government catalog under NSN 5330-01-179-0078. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST7M335-18