PartsTable
Technical Data Sheet
Download PDF

ST7M278-350 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST7M278-350: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, outside_diameter: 3.743 INCHES MINIMUM AND 3.749 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 3.458 INCHES MINIMUM AND 3.478 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, cross-sectional_thickness: 0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-117-1524, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST7M278-350
NSN: 5330-01-117-1524
FSC: 5330 — Packing and Gasket Materials
CAGE: 15284 — EATON CORPORATION DIV FED (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
outside_diameter3.743 INCHES MINIMUM AND 3.749 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter3.458 INCHES MINIMUM AND 3.478 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
cross-sectional_thickness0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
NSN5330-01-117-1524
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST7M278-350 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 3.743 INCHES MINIMUM AND 3.749 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 3.458 INCHES MINIMUM AND 3.478 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: NICKEL ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER3.743 INCHES MINIMUM AND 3.749 INCHES MAXIMUM IN
APERTURE DIAMETER3.458 INCHES MINIMUM AND 3.478 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALNICKEL ALLOY OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 4
10119646Reference document
Same NSN cross-reference
Reference document — Informative reference only
2873-350Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5330PL1739845Reference document
Same NSN cross-reference
Reference document — Informative reference only
A2873-350Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy ST7M278-350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST7M278-350?
ST7M278-350 is a GASKET.
What parts can replace ST7M278-350?
There are 4 known substitutes for ST7M278-350: 10119646, 2873-350, 5330PL1739845 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST7M278-350?
ST7M278-350 is cataloged in the U.S. Government catalog under NSN 5330-01-117-1524. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST7M278-350