PartsTable
Technical Data Sheet
Download PDF

ST7M223T6 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ST7M223T6: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: TITANIUM OVERALL, nut_style: HEXAGON, nut_height: 0.242 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNJS, special_features: W/SOLID FILM LUBRICANT PER MIL-L-8937. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-512-0238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST7M223T6
NSN: 5310-00-512-0238
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialTITANIUM OVERALL
nut_styleHEXAGON
nut_height0.242 INCHES NOMINAL IN
thread_class3B
thread_seriesUNJS
special_featuresW/SOLID FILM LUBRICANT PER MIL-L-8937
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL BOTH ENDS
width_across_flats0.812 INCHES NOMINAL IN
nominal_thread_size0.5625 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch20
NSN5310-00-512-0238
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ST7M223T6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.812 INCHES NOMINAL IN
•
THREAD SERIES: UNJS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4965 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.5625 INCHES IN
•
NUT HEIGHT: 0.242 INCHES NOMINAL IN
•
COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL BOTH ENDS
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.812 INCHES NOMINAL IN
THREAD SERIESUNJS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4965 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.5625 INCHES IN
NUT HEIGHT0.242 INCHES NOMINAL IN
SPECIAL FEATURESW/SOLID FILM LUBRICANT PER MIL-L-8937
COUNTERSINK ANGLE90.0 DEGREES NOMINAL BOTH ENDS
NUT STYLEHEXAGON
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
10121436Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy ST7M223T6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST7M223T6?
ST7M223T6 is a NUT,PLAIN,HEXAGON.
What parts can replace ST7M223T6?
There is 1 known substitute for ST7M223T6: 10121436. Substitute compatibility should be verified for your specific system.
What is the NSN for ST7M223T6?
ST7M223T6 is cataloged in the U.S. Government catalog under NSN 5310-00-512-0238. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST7M223T6