ST5M1402-21 — DUMMY CONNECTOR,RECEPTACLE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

ST5M1402-21: DUMMY CONNECTOR,RECEPTACLE.

The DUMMY CONNECTOR,RECEPTACLE is a the manufacturer industrial component. Key specifications include shell_type: SOLID, overall_width: 1.688 INCHES NOMINAL IN, overall_height: 1.688 INCHES NOMINAL IN, overall_length: 0.802 INCHES MINIMUM AND 0.837 INCHES MAXIMUM IN, shell_material: ALUMINUM ALLOY, shell_surface_treatment: CADMIUM. This part is cataloged in the U.S.

Government catalog under NSN 5935-01-117-3032, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ST5M1402-21

NSN: 5935-01-117-3032
FSC: 5935 — Connectors, Electrical
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

shell_type	SOLID
overall_width	1.688 INCHES NOMINAL IN
overall_height	1.688 INCHES NOMINAL IN
overall_length	0.802 INCHES MINIMUM AND 0.837 INCHES MAXIMUM IN
shell_material	ALUMINUM ALLOY
mating_end_quantity	1
shell_surface_treatment	CADMIUM
connector_locking_method	BAYONET PIN
environmental_protection	SALT WATER RESISTANT
specification/standard_data	81349-MIL-DTL-38999/9 GOVERNMENT SPECIFICATION
unthreaded_mounting_hole_diameter	0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
distance_from_mounting_shoulder_to_front_face	0.697 INCHES NOMINAL IN
NSN	5935-01-117-3032

COMPONENT DIAGRAM

KEY FEATURES

•

CONNECTOR LOCKING METHOD: BAYONET PIN

•

SHELL TYPE: SOLID

•

MATING END QUANTITY: 1

•

SHELL SURFACE TREATMENT: CADMIUM

•

UNTHREADED MOUNTING HOLE DIAMETER: 0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	1.688 INCHES NOMINAL IN
CONNECTOR LOCKING METHOD	BAYONET PIN
SHELL TYPE	SOLID
MATING END QUANTITY	1
SHELL SURFACE TREATMENT	CADMIUM
UNTHREADED MOUNTING HOLE DIAMETER	0.123 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
OVERALL LENGTH	0.802 INCHES MINIMUM AND 0.837 INCHES MAXIMUM IN
OVERALL WIDTH	1.688 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.375 INCHES NOMINAL IN
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE

SUBSTITUTES & CROSS-REFERENCES 9

MIL-C-38999Reference document

Same NSN cross-reference

Reference document — Secondary reference

DRP07A21SReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

650FS001NF21Reference document

Same NSN cross-reference

Reference document — Secondary reference

1107-001-21Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-38999Reference document

Same NSN cross-reference

Reference document — Secondary reference

M38999/9-21BSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy ST5M1402-21?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ST5M1402-21?

ST5M1402-21 is a DUMMY CONNECTOR,RECEPTACLE.

What parts can replace ST5M1402-21?

There are 9 known substitutes for ST5M1402-21: MIL-C-38999, DRP07A21S, 650FS001NF21 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for ST5M1402-21?

ST5M1402-21 is cataloged in the U.S. Government catalog under NSN 5935-01-117-3032. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ST5M1402-21 — DUMMY CONNECTOR,RECEPTACLE

Request a Quote — ST5M1402-21