PartsTable
Technical Data Sheet
Download PDF

ST57D99-5 — ELBOW,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

ST57D99-5: ELBOW,TUBE.

The ELBOW,TUBE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, flow_angle: 45.0 DEGREES, leg_length: 2.560 INCHES MINIMUM AND 2.590 INCHES MAXIMUM FIRST END IN, connection_type: UNTHREADED INTERNAL TUBE ALL ENDS, connection_style: SWAGED W/ GROOVES (TUBE) ALL ENDS, surface_treatment: PASSIVATE OUTSIDE. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-535-2175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST57D99-5
NSN: 4730-00-535-2175
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 04236 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
flow_angle45.0 DEGREES
leg_length2.560 INCHES MINIMUM AND 2.590 INCHES MAXIMUM FIRST END IN
connection_typeUNTHREADED INTERNAL TUBE ALL ENDS
connection_styleSWAGED W/ GROOVES (TUBE) ALL ENDS
special_featuresTHE INTERNAL SURFACE OF THE PERMASWAGE ENDS,WILL BE POLYTETRAFLUOROETHYLENE COATED,PER DEUTSCH CO,SPEC NO. DMCPS1009,TO 0.325 IN. MIN 0.350 IN. MAX,INTO THE FITTING BORE IN
surface_treatmentPASSIVATE OUTSIDE
material_document_and_classificationAMS 5656,TYPE 21-6-9 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
nominal_outside_diameter_tube_accommodated1.000 INCHES ALL ENDS IN
surface_treatment_document_and_classificationMIL-F-14072,E300,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
tubing_wall_nominal_thickness_for_which_designed0.058 INCHES ALL ENDS IN
NSN4730-00-535-2175
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: ST57D99-5 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 45.0 DEGREES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
•
CONNECTION STYLE: SWAGED W/ GROOVES (TUBE) ALL ENDS
•
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED: 0.058 INCHES ALL ENDS IN
•
CONNECTION TYPE: UNTHREADED INTERNAL TUBE ALL ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5656,TYPE 21-6-9 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 1.000 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
FLOW ANGLE45.0 DEGREES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
CONNECTION STYLESWAGED W/ GROOVES (TUBE) ALL ENDS
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED0.058 INCHES ALL ENDS IN
CONNECTION TYPEUNTHREADED INTERNAL TUBE ALL ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5656,TYPE 21-6-9 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED1.000 INCHES ALL ENDS IN
LEG LENGTH2.560 INCHES MINIMUM AND 2.590 INCHES MAXIMUM FIRST END IN
SPECIAL FEATURESTHE INTERNAL SURFACE OF THE PERMASWAGE ENDS,WILL BE POLYTETRAFLUOROETHYLENE COATED,PER DEUTSCH CO,SPEC NO. DMCPS1009,TO 0.325 IN. MIN 0.350 IN. MAX,INTO THE FITTING BORE IN
SUBSTITUTES & CROSS-REFERENCES 4
H10090-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST57D99Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
AC1107C16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LD83061-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST57D99-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST57D99-5?
ST57D99-5 is a ELBOW,TUBE.
What parts can replace ST57D99-5?
There are 4 known substitutes for ST57D99-5: H10090-16, ST57D99, AC1107C16 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST57D99-5?
ST57D99-5 is cataloged in the U.S. Government catalog under NSN 4730-00-535-2175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST57D99-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.