PartsTable
Technical Data Sheet
Download PDF

ST57D96-5 — TEE,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

ST57D96-5: TEE,TUBE.

The TEE,TUBE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-10 OVERALL, leg_length: 1.990 INCHES NOMINAL ALL ENDS IN, connection_style: SWAGED W/ GROOVES (TUBE) ALL ENDS, surface_treatment: PASSIVATE OVERALL, material_document_and_classification: AMS 5656 ASSN STD SINGLE MATERIAL RESPONSE OVERALL, nominal_outside_diameter_tube_accommodated: 0.750 INCHES ALL ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-008-8812, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST57D96-5
NSN: 4730-00-008-8812
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 04236 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL COMP XM-10 OVERALL
leg_length1.990 INCHES NOMINAL ALL ENDS IN
connection_styleSWAGED W/ GROOVES (TUBE) ALL ENDS
special_featuresTHE INTERNAL SURFACE OF THE PERMASWAGE END,WILL BE POLYTETRAFLOROETHYLENE COATED PER DEUTSCH CO,SPEC NO. DMCPS1009 TO 0.365 IN. MIN 0.390 IN. MAX,INTO THE FITTING BORE IN
surface_treatmentPASSIVATE OVERALL
material_document_and_classificationAMS 5656 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
nominal_outside_diameter_tube_accommodated0.750 INCHES ALL ENDS IN
surface_treatment_document_and_classificationQQ-P-35 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN4730-00-008-8812
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: ST57D96-5 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 5
D9855-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST57D96Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LD83001-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
C7854-16SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H9855-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST57D96-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST57D96-5?
ST57D96-5 is a TEE,TUBE.
What parts can replace ST57D96-5?
There are 5 known substitutes for ST57D96-5: D9855-16, ST57D96, LD83001-16 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST57D96-5?
ST57D96-5 is cataloged in the U.S. Government catalog under NSN 4730-00-008-8812. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST57D96-5