PartsTable
Technical Data Sheet
Download PDF

ST5088-05 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST5088-05: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, special_features: CUSHION PER SPEC PWA 484-2,AND JOGGLED TYPE, style_designator: SINGLE LOOP, material_diameter: 0.034 INCHES NOMINAL IN, loop_inside_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-491-1468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST5088-05
NSN: 5340-01-491-1468
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
overall_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
special_featuresCUSHION PER SPEC PWA 484-2,AND JOGGLED TYPE
style_designatorSINGLE LOOP
material_diameter0.034 INCHES NOMINAL IN
loop_inside_diameter0.312 INCHES NOMINAL IN
end_item_identificationF100PW0220 EN
NSN5340-01-491-1468
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST5088-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.034 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: NICKEL ALLOY OVERALL
•
LOOP INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.034 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SPECIAL FEATURESCUSHION PER SPEC PWA 484-2,AND JOGGLED TYPE
END ITEM IDENTIFICATIONF100PW0220 EN
MATERIALNICKEL ALLOY OVERALL
LOOP INSIDE DIAMETER0.312 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST5088-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST5088-05?
ST5088-05 is a CLAMP,LOOP.
What is the NSN for ST5088-05?
ST5088-05 is cataloged in the U.S. Government catalog under NSN 5340-01-491-1468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST5088-05

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.