PartsTable
Technical Data Sheet
Download PDF

ST40C-138P3100SB — BAND,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST40C-138P3100SB: BAND,RETAINING.

The BAND,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.720 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN, length: 2.500 INCHES NOMINAL IN, material: STEEL COMP 301, end_style: SOLID LOOP, thickness: 0.025 INCHES NOMINAL IN, loop_radius: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-283-6746, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST40C-138P3100SB
NSN: 5340-01-283-6746
FSC: 5340 — Hardware, Commercial
CAGE: 14242 — VOSS INDUSTRIES, LLC (USA)
SPECIFICATIONS
width0.720 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN
length2.500 INCHES NOMINAL IN
materialSTEEL COMP 301
end_styleSOLID LOOP
thickness0.025 INCHES NOMINAL IN
loop_radius0.250 INCHES NOMINAL IN
thread_size0.250-28
basic_shape_styleFLAT
material_document_and_classificationMIL-S-5059, COMP 301, COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-283-6746
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST40C-138P3100SB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.500 INCHES NOMINAL IN
•
END STYLE: LOOP WITH T-BOLT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059, COMP 301, COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE
•
LOOP RADIUS: 0.250 INCHES NOMINAL IN
•
BASIC SHAPE STYLE: FLAT
•
THREAD SIZE: 0.250-28
•
WIDTH: 0.720 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH2.500 INCHES NOMINAL IN
END STYLELOOP WITH T-BOLT
END STYLESOLID LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059, COMP 301, COND 1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE
LOOP RADIUS0.250 INCHES NOMINAL IN
BASIC SHAPE STYLEFLAT
THREAD SIZE0.250-28
WIDTH0.720 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN
MATERIALSTEEL COMP 301
THICKNESS0.025 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
GC501N-H3100HPReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST40C-138P3100SB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST40C-138P3100SB?
ST40C-138P3100SB is a BAND,RETAINING.
What parts can replace ST40C-138P3100SB?
There is 1 known substitute for ST40C-138P3100SB: GC501N-H3100HP. Substitute compatibility should be verified for your specific system.
What is the NSN for ST40C-138P3100SB?
ST40C-138P3100SB is cataloged in the U.S. Government catalog under NSN 5340-01-283-6746. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST40C-138P3100SB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.