ST3M760V4-10 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

ST3M760V4-10: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: CROWN COUTERSUNK GREATER THAN 135 DEGREES, grip_length: 0.630 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-165-1396, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ST3M760V4-10

NSN: 5320-01-165-1396
FSC: 5320 — Rivets
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

material	TITANIUM ALLOY UNS R56400 OVERALL
head_style	CROWN COUTERSUNK GREATER THAN 135 DEGREES
grip_length	0.630 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
fastener_length	1.010 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.5066 INCHES MAXIMUM IN
nominal_thread_size	0.250 INCHES IN
width_between_flats	0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN
NSN	5320-01-165-1396

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.010 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: CROWN COUTERSUNK GREATER THAN 135 DEGREES

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.250 INCHES IN

•

GRIP LENGTH: 0.630 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
FASTENER LENGTH	1.010 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	CROWN COUTERSUNK GREATER THAN 135 DEGREES
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.250 INCHES IN
GRIP LENGTH	0.630 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 4

HLT313TB-8-10Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HLT313DL-8-10Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10111899Reference document

Same NSN cross-reference

Reference document — Informative reference only

AIC-L-760V4-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy ST3M760V4-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ST3M760V4-10?

ST3M760V4-10 is a PIN-RIVET.

What parts can replace ST3M760V4-10?

There are 4 known substitutes for ST3M760V4-10: HLT313TB-8-10, HLT313DL-8-10, 10111899 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for ST3M760V4-10?

ST3M760V4-10 is cataloged in the U.S. Government catalog under NSN 5320-01-165-1396. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ST3M760V4-10 — PIN-RIVET

Request a Quote — ST3M760V4-10