PartsTable
Technical Data Sheet
Download PDF

ST3M740-4-6 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M740-4-6: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OVERALL, head_style: OVAL COUNTERSUNK, grip_length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-135-2401, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M740-4-6
NSN: 5305-01-135-2401
FSC: 5305 — Screws
CAGE: 92215 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV TORRANCE OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
head_styleOVAL COUNTERSUNK
grip_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
thread_length0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
fastener_length0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentALUMINUM AND CHROMATE OVERALL
NSN5305-01-135-2401
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M740-4-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: OVAL COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEOVAL COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
ST3M740-4L6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10115372Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST3M740-4-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M740-4-6?
ST3M740-4-6 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M740-4-6?
There are 2 known substitutes for ST3M740-4-6: ST3M740-4L6, 10115372. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M740-4-6?
ST3M740-4-6 is cataloged in the U.S. Government catalog under NSN 5305-01-135-2401. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M740-4-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.