PartsTable
Technical Data Sheet
Download PDF

ST3M733-3L2 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M733-3L2: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.338 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-102-5521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M733-3L2
NSN: 5305-01-102-5521
FSC: 5305 — Screws
CAGE: 1VSL7 — HOUSTON PRECISION FASTENERS I LP (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.338 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
thread_length0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
fastener_length0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
features_providedDRY FILM LUBRICANT
surface_treatmentALUMINUM OVERALL
NSN5305-01-102-5521
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M733-3L2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FEATURES PROVIDED: DRY FILM LUBRICANT
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
FEATURES PROVIDEDDRY FILM LUBRICANT
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
HT4057-3-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST3M733-3-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
11935-3L2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT4057-3-2AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST3M733-3L2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M733-3L2?
ST3M733-3L2 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M733-3L2?
There are 4 known substitutes for ST3M733-3L2: HT4057-3-2, ST3M733-3-2, 11935-3L2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M733-3L2?
ST3M733-3L2 is cataloged in the U.S. Government catalog under NSN 5305-01-102-5521. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M733-3L2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.