PartsTable
Technical Data Sheet
Download PDF

ST3M714-3D29 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M714-3D29: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_type: DRILLED, head_style: FLAT COUNTERSUNK, grip_length: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, point_style: FLAT, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-532-7319, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M714-3D29
NSN: 5305-01-532-7319
FSC: 5305 — Screws
CAGE: 06710 — VALLEY-TODECO, INC. DBA ARCONIC FASTENING SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_typeDRILLED
head_styleFLAT COUNTERSUNK
grip_length0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
point_styleFLAT
thread_class3A A
grip_diameter0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
head_diameter0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
hole_diameter0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
hole_quantity1
thread_length0.276 INCHES NOMINAL IN
fastener_length0.261 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
NSN5305-01-532-7319
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M714-3D29 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.261 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.276 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
•
GRIP LENGTH: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.261 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
THREAD LENGTH0.276 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
GRIP LENGTH0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
GRIP DIAMETER0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
INTERNAL DRIVE STYLEHIGH-TORQUE
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
HT4049-3D29Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
WC4049-3D29Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST3M714-3D29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M714-3D29?
ST3M714-3D29 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M714-3D29?
There are 2 known substitutes for ST3M714-3D29: HT4049-3D29, WC4049-3D29. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M714-3D29?
ST3M714-3D29 is cataloged in the U.S. Government catalog under NSN 5305-01-532-7319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M714-3D29