PartsTable
Technical Data Sheet
Download PDF

ST3M713-7D15 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M713-7D15: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, head_diameter: 0.612 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-034-6626, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M713-7D15
NSN: 5305-01-034-6626
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
head_diameter0.612 INCHES MINIMUM AND 0.672 INCHES MAXIMUM IN
thread_length0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
fastener_length1.376 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-01-034-6626
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M713-7D15 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.376 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 23-112,MCDONNEL DOUGLAS CORP MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.438 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.376 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
THREAD LENGTH0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATION23-112,MCDONNEL DOUGLAS CORP MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN
GRIP DIAMETER0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
AT4048-7D-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
HT4048-7D-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
11929-7D15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST3M713-7D15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M713-7D15?
ST3M713-7D15 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M713-7D15?
There are 3 known substitutes for ST3M713-7D15: AT4048-7D-15, HT4048-7D-15, 11929-7D15. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M713-7D15?
ST3M713-7D15 is cataloged in the U.S. Government catalog under NSN 5305-01-034-6626. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M713-7D15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.