ST3M675-4-3 — RIVET,SOLID

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

ST3M675-4-3: RIVET,SOLID.

The RIVET,SOLID is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), shank_style: STRAIGHT, heat_treatment: ANNEALED OVERALL, shank_diameter: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN, shear_strength: 648 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-024-4888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ST3M675-4-3

NSN: 5320-01-024-4888
FSC: 5320 — Rivets
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
shank_style	STRAIGHT
heat_treatment	ANNEALED OVERALL
shank_diameter	0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
shear_strength	648 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.174 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
specification/standard_data	80205-NAS1097 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classification	MMS1220 ALLOY 55TI-45CB FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN	5320-01-024-4888

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN

•

HEAT TREATMENT: ANNEALED OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MMS1220 ALLOY 55TI-45CB FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

SPECIFICATION/STANDARD DATA: 80205-NAS1097 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SHANK STYLE: STRAIGHT

•

COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
FASTENER LENGTH	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
HEAT TREATMENT	ANNEALED OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MMS1220 ALLOY 55TI-45CB FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SPECIFICATION/STANDARD DATA	80205-NAS1097 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLE	STRAIGHT
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
SHEAR STRENGTH	648 SINGLE POUNDS PER SQUARE INCH
MATERIAL	TITANIUM ALLOY OVERALL

SUBSTITUTES & CROSS-REFERENCES 3

CSR904B-4-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10123947Reference document

Same NSN cross-reference

Reference document — Informative reference only

SC-R30-4-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy ST3M675-4-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ST3M675-4-3?

ST3M675-4-3 is a RIVET,SOLID.

What parts can replace ST3M675-4-3?

There are 3 known substitutes for ST3M675-4-3: CSR904B-4-3, 10123947, SC-R30-4-3. Substitute compatibility should be verified for your specific system.

What is the NSN for ST3M675-4-3?

ST3M675-4-3 is cataloged in the U.S. Government catalog under NSN 5320-01-024-4888. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ST3M675-4-3 — RIVET,SOLID

Request a Quote — ST3M675-4-3