PartsTable
Technical Data Sheet
Download PDF

ST3M669-6 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ST3M669-6: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING NUT, nut_style: PLATE, nut_height: 0.334 INCHES NOMINAL IN, nut_length: 1.625 INCHES NOMINAL IN, plate_width: 0.800 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-567-6770, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M669-6
NSN: 5310-00-567-6770
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING NUT
nut_stylePLATE
nut_height0.334 INCHES NOMINAL IN
nut_length1.625 INCHES NOMINAL IN
plate_width0.800 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
plate_thickness0.045 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedFLOATING NUT
surface_treatmentPASSIVATE NUT
nominal_thread_size0.375 INCHES IN
NSN5310-00-567-6770
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ST3M669-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.045 INCHES NOMINAL IN
•
NUT LENGTH: 1.625 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.800 INCHES NOMINAL IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MOUNTING HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
FEATURES PROVIDED: FLOATING NUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.045 INCHES NOMINAL IN
NUT LENGTH1.625 INCHES NOMINAL IN
THREAD SERIESUNF
PLATE WIDTH0.800 INCHES NOMINAL IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL IN
FEATURES PROVIDEDFLOATING NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
F49972-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST3M669-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M669-6?
ST3M669-6 is a NUT,PLAIN,PLATE.
What parts can replace ST3M669-6?
There is 1 known substitute for ST3M669-6: F49972-6. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M669-6?
ST3M669-6 is cataloged in the U.S. Government catalog under NSN 5310-00-567-6770. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M669-6