PartsTable
Technical Data Sheet
Download PDF

ST3M653C7-13A — SCREW,SHOULDER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M653C7-13A: SCREW,SHOULDER.

The SCREW,SHOULDER is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.124 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.881 INCHES MINIMUM AND 0.888 INCHES MAXIMUM IN, thread_length: 0.630 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-146-8014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M653C7-13A
NSN: 5305-01-146-8014
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.124 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.881 INCHES MINIMUM AND 0.888 INCHES MAXIMUM IN
thread_length0.630 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
shoulder_shapeROUND FIRST SHOULDER
fastener_length1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
shoulder_length0.675 INCHES MINIMUM AND 0.698 INCHES MAXIMUM FIRST SHOULDER IN
special_featuresFURNISHED WITH ONE RUBBER O RING
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN5305-01-146-8014
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M653C7-13A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.124 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
SHOULDER LENGTH: 0.675 INCHES MINIMUM AND 0.698 INCHES MAXIMUM FIRST SHOULDER IN
•
SHOULDER DIAMETER: 0.4521 INCHES MINIMUM AND 0.4526 INCHES MAXIMUM FIRST SHOULDER IN
•
THREAD LENGTH: 0.630 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
•
SHOULDER SHAPE: ROUND FIRST SHOULDER
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.438 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.124 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
FASTENER LENGTH1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SHOULDER LENGTH0.675 INCHES MINIMUM AND 0.698 INCHES MAXIMUM FIRST SHOULDER IN
SHOULDER DIAMETER0.4521 INCHES MINIMUM AND 0.4526 INCHES MAXIMUM FIRST SHOULDER IN
THREAD LENGTH0.630 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
SHOULDER SHAPEROUND FIRST SHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
HT4020-7-13AXReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST3M653C7-13A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M653C7-13A?
ST3M653C7-13A is a SCREW,SHOULDER.
What parts can replace ST3M653C7-13A?
There is 1 known substitute for ST3M653C7-13A: HT4020-7-13AX. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M653C7-13A?
ST3M653C7-13A is cataloged in the U.S. Government catalog under NSN 5305-01-146-8014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M653C7-13A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.