PartsTable
Technical Data Sheet
Download PDF

ST3M496-7-22 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M496-7-22: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.375 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.452 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, head_diameter: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-567-7819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M496-7-22
NSN: 5305-01-567-7819
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.375 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.452 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
head_diameter0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
thread_length0.599 INCHES NOMINAL IN
fastener_length1.974 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.437 INCHES IN
NSN5305-01-567-7819
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M496-7-22 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.974 INCHES NOMINAL IN
•
THREAD LENGTH: 0.599 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.437 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 1.375 INCHES NOMINAL IN
•
GRIP DIAMETER: 0.452 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: HIGH-TORQUE
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.974 INCHES NOMINAL IN
THREAD LENGTH0.599 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.437 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.375 INCHES NOMINAL IN
GRIP DIAMETER0.452 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
INTERNAL DRIVE STYLEHIGH-TORQUE
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCYSCREW CLOSE TOLERANCE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
11913-7-22Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST3M496-7-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M496-7-22?
ST3M496-7-22 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M496-7-22?
There is 1 known substitute for ST3M496-7-22: 11913-7-22. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M496-7-22?
ST3M496-7-22 is cataloged in the U.S. Government catalog under NSN 5305-01-567-7819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M496-7-22