PartsTable
Technical Data Sheet
Download PDF

ST3M454-7L27 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M454-7L27: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, head_diameter: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-295-1069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M454-7L27
NSN: 5305-01-295-1069
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
head_diameter0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
thread_length0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
fastener_length2.348 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-01-295-1069
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M454-7L27 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 2.348 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.438 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH2.348 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM IN
GRIP DIAMETER0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
HT4025L7-27Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
11905-7L27Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10113658Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST3M454-7L27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M454-7L27?
ST3M454-7L27 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M454-7L27?
There are 3 known substitutes for ST3M454-7L27: HT4025L7-27, 11905-7L27, 10113658. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M454-7L27?
ST3M454-7L27 is cataloged in the U.S. Government catalog under NSN 5305-01-295-1069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M454-7L27

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.