PartsTable
Technical Data Sheet
Download PDF

ST3M454-4L8 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M454-4L8: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-006-2736, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M454-4L8
NSN: 5305-01-006-2736
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
fastener_length0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-01-006-2736
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M454-4L8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN
THREAD LENGTH0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLEHIGH-TORQUE
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 5
HT4025L4-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11905-4L8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST3M454-4LBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10114818Reference document
Same NSN cross-reference
Reference document — Informative reference only
WC4025L-4-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST3M454-4L8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M454-4L8?
ST3M454-4L8 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M454-4L8?
There are 5 known substitutes for ST3M454-4L8: HT4025L4-8, 11905-4L8, ST3M454-4LB and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M454-4L8?
ST3M454-4L8 is cataloged in the U.S. Government catalog under NSN 5305-01-006-2736. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M454-4L8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.