PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ST3M454-3L6
ST3M454-3L6 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-364-9543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M454-3L6
NSN: 5305-00-364-9543
FSC: 5305
CAGE: 58998 — FASTENER INNOVATION TECHNOLOGY, INC. DBA F I T (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
fastener_length0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-00-364-9543
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M454-3L6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD DIAMETER: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
•
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3A A
GRIP LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD DIAMETER0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
GRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
THREAD LENGTH0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
VSR3SS5G25Interchangeable
interchangeable cross-reference
interchangeable
CYRB77-2Interchangeable
interchangeable cross-reference
interchangeable
SR3SS5G59Interchangeable
interchangeable cross-reference
interchangeable
10125240Interchangeable
Same NIIN cross-reference
interchangeable
CHT4025-3-6Interchangeable
Same NIIN cross-reference
interchangeable
HT4025L3-6Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ST3M454-3L6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M454-3L6?
ST3M454-3L6 is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M454-3L6?
There are 7 known substitutes for ST3M454-3L6: VSR3SS5G25, CYRB77-2, SR3SS5G59 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M454-3L6?
ST3M454-3L6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-364-9543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M454-3L6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026