PartsTable
Technical Data Sheet
Download PDF

ST3M448C3M9 — NUT ASSEMBLY,SELF-LOCKING,GANG C

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ST3M448C3M9: NUT ASSEMBLY,SELF-LOCKING,GANG C.

NUT ASSEMBLY,SELF-LOCKING,GANG C. Key specifications include material: IRON ALLOY 660 NUT, nut_style: GANG CHANNEL, SELF LOCKING, lubrication: DRY FILM LUBRICANT, nut_spacing: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, nut_quantity: 64, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-029-8928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M448C3M9
NSN: 5310-01-029-8928
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialIRON ALLOY 660 NUT
nut_styleGANG CHANNEL, SELF LOCKING
lubricationDRY FILM LUBRICANT
nut_spacing1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
nut_quantity64
thread_class3B
channel_styleSTRAIGHT TYPE
overall_width0.416 INCHES MAXIMUM IN
thread_seriesUNF
overall_length72.000 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
special_featuresCOLOR LIGHT BLUE FED STD595 NO. 15526
NSN5310-01-029-8928
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ST3M448C3M9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
THREAD SERIES: UNF
•
NUT QUANTITY: 64
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5525 ASSN STD SINGLE MATERIAL RESPONSE NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
THREAD SERIESUNF
NUT QUANTITY64
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5525 ASSN STD SINGLE MATERIAL RESPONSE NUT
OVERALL LENGTH72.000 INCHES NOMINAL IN
OVERALL WIDTH0.416 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SPECIFICATION/STANDARD DATA76301-ST3-448 MANUFACTURERS STANDARD
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
SUBSTITUTES & CROSS-REFERENCES 2
10122003Reference document
Same NSN cross-reference
Reference document — Informative reference only
G10851-3-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST3M448C3M9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M448C3M9?
ST3M448C3M9 is a NUT ASSEMBLY,SELF-LOCKING,GANG C.
What parts can replace ST3M448C3M9?
There are 2 known substitutes for ST3M448C3M9: 10122003, G10851-3-9. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M448C3M9?
ST3M448C3M9 is cataloged in the U.S. Government catalog under NSN 5310-01-029-8928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M448C3M9