PartsTable
Technical Data Sheet
Download PDF

ST3M430V3-7D — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

ST3M430V3-7D: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R54520 OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, head_height: 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-010-9942, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M430V3-7D
NSN: 5305-01-010-9942
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R54520 OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
head_height0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
thread_length0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
NSN5305-01-010-9942
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ST3M430V3-7D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
HEAD HEIGHT0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
FASTENER LENGTH0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
THREAD LENGTH0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONNAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
HT8137-3-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
110179-3-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
BM33024V3-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST3M430V3-7D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M430V3-7D?
ST3M430V3-7D is a SCREW,CLOSE TOLERANCE.
What parts can replace ST3M430V3-7D?
There are 3 known substitutes for ST3M430V3-7D: HT8137-3-7, 110179-3-7, BM33024V3-7. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M430V3-7D?
ST3M430V3-7D is cataloged in the U.S. Government catalog under NSN 5305-01-010-9942. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M430V3-7D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.