PartsTable
Technical Data Sheet
Download PDF

ST3M404C12 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ST3M404C12: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.375 INCHES NOMINAL IN, temp_rating: 450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-273-5873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST3M404C12
NSN: 5310-00-273-5873
FSC: 5310 — Nuts and Washers
CAGE: 92595 — NELSON STUD WELDING, INC (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.375 INCHES NOMINAL IN
temp_rating450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
special_featuresDYED BROWN
thread_directionRIGHT-HAND
countersink_angle110.0 DEGREES NOMINAL NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
NSN5310-00-273-5873
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ST3M404C12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
SPECIFICATION/STANDARD DATA: 76301-ST3-404 MANUFACTURERS STANDARD
•
NUT HEIGHT: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING450.0 FAHRENHEIT MINIMUM AND 800.0 FAHRENHEIT MAXIMUM DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
SPECIFICATION/STANDARD DATA76301-ST3-404 MANUFACTURERS STANDARD
NUT HEIGHT0.375 INCHES NOMINAL IN
SPECIAL FEATURESDYED BROWN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 5
3D0236C12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
E10080-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10121229Reference document
Same NSN cross-reference
Reference document — Informative reference only
9343C12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
74640C12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy ST3M404C12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST3M404C12?
ST3M404C12 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace ST3M404C12?
There are 5 known substitutes for ST3M404C12: 3D0236C12, E10080-12, 10121229 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST3M404C12?
ST3M404C12 is cataloged in the U.S. Government catalog under NSN 5310-00-273-5873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST3M404C12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.