PartsTable
Technical Data Sheet
Download PDF

ST373307LW-DTS1 — DISK DRIVE UNIT

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

ST373307LW-DTS1: DISK DRIVE UNIT.

The DISK DRIVE UNIT is a the manufacturer hard disk drive designed for enterprise environments demanding consistent performance and data integrity. Key specifications include design_type: HARD DISK, unit_design: INTERNAL, drive_height: HALF, overall_width: 4.000 INCHES NOMINAL IN, interface_type: SCSI, overall_height: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 7025-01-571-0246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ ST373307LW-DTS1
NSN: 7025-01-571-0246
FSC: 7025 — Information Technology Input/output and Storage Devices
CAGE: 65867 — SEAGATE TECHNOLOGY (USA)
SPECIFICATIONS
design_typeHARD DISK
unit_designINTERNAL
drive_heightHALF
overall_width4.000 INCHES NOMINAL IN
drive_quantity1
interface_typeSCSI
overall_height1.000 INCHES NOMINAL IN
overall_length5.750 INCHES NOMINAL IN
operating_temp_range+5.0 TO 55.0 CELSIUS DEGC
data_storage_capacity73.40 GIGABYTES
end_item_identification7443924-1 DDG91T102(53711), MONITOR, SGL, DTS-1C; 7443924-1 AWS SITES(53711), MONITOR, SGL, DTS-1C
access_time_in_milliseconds4.7
NSN7025-01-571-0246
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K ST373307LW-DTS1 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN ST373307LW-DTS1 MFR OEM
KEY FEATURES
•
ACCESS TIME IN MILLISECONDS: 4.7
•
INTERFACE TYPE: SCSI
•
DESIGN TYPE: HARD DISK
•
TRANSFER RATE IN MEGABYTES PER SECOND: 5.3
•
DRIVE QUANTITY: 1
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
TECHNICAL CHARACTERISTICS
ACCESS TIME IN MILLISECONDS4.7
OVERALL HEIGHT1.000 INCHES NOMINAL IN
INTERFACE TYPESCSI
DESIGN TYPEHARD DISK
TRANSFER RATE IN MEGABYTES PER SECOND5.3
DRIVE QUANTITY1
OVERALL LENGTH5.750 INCHES NOMINAL IN
OVERALL WIDTH4.000 INCHES NOMINAL IN
DRIVE HEIGHTHALF
OPERATING TEMP RANGE+5.0 TO 55.0 CELSIUS DEGC
OTHER ITEMS IN FSC 7025 — Information Technology Input/output and Storage Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
7025-00-001-2681 7025-00-001-5588 7025-00-001-6998 7025-00-001-6999 7025-00-001-7000 7025-00-001-7025 7025-00-001-7026 7025-00-001-7027
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy ST373307LW-DTS1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST373307LW-DTS1?
ST373307LW-DTS1 is a DISK DRIVE UNIT. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What is the NSN for ST373307LW-DTS1?
ST373307LW-DTS1 is cataloged in the U.S. Government catalog under NSN 7025-01-571-0246. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST373307LW-DTS1